How To Sharpen A Chainsaw?

July 26, 2021

How To Sharpen A Chainsaw?

What Is The Best Way To Sharpen A Chainsaw?

A chainsaw is a powerful tool in the daily life of any homeowner.

It makes light work of many tasks you might otherwise need to hire someone to do.

But chainsaws can quickly lose their effectiveness if you don't keep them in good condition.

It all starts with the chain. The chain is the engine of your saw, and as such, it needs to be in top shape.

You can sharpen the chain but if it is damaged, it won't work.

The most common chain issues are loose rivets and worn out lube.

A bit of know-how and some simple maintenance:

Step 1: OIL

You need to oil your chain frequently to keep it operating smoothly and to keep the saw dust from building up. This causes premature wear.

It is best to do this before you start cutting wood and to do this after every cutting session.

Step 2: Remove the chain bar

To sharpen the chain, you need to remove the bar and chain from the saw.

There is a small bolt on the top of the bar that holds it in place. If you have a wrench, you can use it.

If not, you can use pliers. Just make sure you take it off.

You may have to rotate it a few times to get it to come off. Use pliers to hold the bar.

The chain will come off with the chainsaw bar when you loosen the bolt.

Sometimes the chain will get stuck in the sprocket.

If this happens, you may have to go to an auto parts store and get an emergency "chain breaker" tool.

Step 3: Fixing the chain

Measure the length of the chain. Remember, a brand new chain has two ends that are different from the rest of the chain.

These ends are called a master link. If the chain has a master link then you must remove the master link and then remove the chain from the saw.

If there is a master link then the chain will not come off without removing it.

You can purchase a master link tool for a variety of costs.

How long chainsaw chain last

We all want the best tool for the job, but few of us realize that we are not always getting the best tool for the job.

Good quality chains will last anywhere from 30 to 40 hours of cutting, depending on the length of the bar and the number of teeth.

Therefore, users should find out how long the chainsaw chain will last, and before replacing it, they should check the supply.

How often should you sharpen chainsaw?

Chainsaws are one of the most common tools to be used in the garden, but you may not know how often they should be sharpened to ensure they are in tip-top shape.

If you use a chainsaw on a regular basis, it is recommended to sharpen the chainsaw blade once a month.

When To Sharpen A Chainsaw Chain?

Chainsaws are often the first tools that people use to start a woodworking or gardening business.

One of the most common tools used in the garden, and when used correctly they can make a tree removal job a breeze.

Unfortunately, chainsaws are also the first tools that break.

Timing is important to sharpening the chain.

If you sharpen the chain too often, the teeth become too thin for the bar and will bend.

Check the chain often. It's highly recommended that you sharpen the chain before each use.

Most chainsaws are not built to last beyond a few years, so when it comes to deciding when it is time to sharpen your dull chainsaw chain, it is important to keep in mind that you will probably be replacing the chain at least once every two years.

Electric chainsaw sharpener

With autumn quickly approaching, you're going to want to get your chainsaw sharpened up before you start cutting down your favourite tree.

You can do this at home with a standard chainsaw sharpener, but we've discovered an electric option that is a whole lot easier to use.

It's a good idea to keep your chainsaw oiled and clean to prevent any build up of rust, and make sure you keep it good and sharp by regularly to professional chainsaw sharpening service.

There are several types of chainsaw sharpeners out there, but the one that will help you the most is the electric one.

How Do I Know If I Need A New Chain?

Chains break. They get rusty; they get greasy, and they get worn down.

Some of them even fall off your garden machinery, which means they get lost, and you have to buy a new one.

With chainsaws, you always have to be thinking about the chain.

It's important to keep it in good condition, there's nothing worse than a creaky chain.

However, a worn out chain is also a sign that your saw is in need of a service.

If your chain no longer works, it's time to replace it.

When you're riding, you should be able to turn the pedals smoothly.

If the pedals seem to stick while you're pedaling, or if the chain is making loud noises, it's time to replace your chain.

Range of chainsaw chains

Chainsaw chains are classified by teeth pitch, gauge (thickness) and length.

The gauge of a chainsaw chain refers to the width of the drive links.

The pitch is the distance between the centers of two adjacent teeth.

A saw with a small pitch and large gauge is also referred to as a "wide-cut" saw.

The chainsaw chain has a large range, from 6 to 10 inches, so you have to choose the right size for the saw.

A good place to check is the manufacturer's website.

Chainsaw chains come in a variety of sizes, as measured by the number of drive links.

The larger the chain, the wider the cutting capacity.

Chainsaw Sprockets

Chainsaw Sprockets are the spinning wheels on a chainsaw that helps move the chain around the bar and towards the chainsaw teeth.

A good selection of chainsaw sprockets, chainsaw chains and other replacement chainsaw parts will help keep your chainsaw in top condition and working at peak efficiency.

It is important to always use the correct sizes for your chainsaw, and to always maintain a sharp chainsaw.

Chainsaw For Logging

You've probably heard of the chainsaw, and if you have, it's most likely that you have an extremely powerful and versatile tool that can help you cope with the most difficult tasks in the garden.

It is a safe, portable tool that you can use to cut branches and logs easily with less work and effort.

But what if you have a huge and difficult log that you need to cut?

Then, you have to use a chainsaw for logging with a chainsaw chain that's long enough and strong enough to cut through that log.

Chainsaw blade

A chainsaw blade is the part of your chainsaw between the motor and the cut bar.

It is typically made of metal, acrylic or composite materials.

The purpose of the blade is to cut the wood into sawdust, and is therefore a vital component of a chainsaw.

The chainsaw blade maintains the cutting edge and cuts the wood into strips.

The size of the chainsaw blade tooth angle is chosen to do the job and to suit the cutter, which is often proportional to the overall size of the chainsaw.

Guide about chainsaw maintenance

Chainsaws are one of the most common tools we use in our everyday life.

However, the fact is that some of these tools may have a short life span.

If you keep chainsaws for a very short period, they have a very short life span as their lubrication system is not designed to keep them running for a longer period of time.

They have a long history of being used for cutting down trees and branches.

Find out how to take care of your chainsaw properly.

This guide will show you how to take care of your chainsaw properly.

First, we'll go over what you need to do before you even start using your chainsaw.

This includes inspecting the chainsaw by using the steps below.

  • Check for loose, cracked, or broken parts.
  • Check for signs of damage.
  • Check for cracks or damage on the blade tooth angle.

There are many things that can go wrong with your chainsaw, and if they do you will need to know how to fix them.

Similar Posts You May Like

How To Replace A Grass Trimmer Cord?

What Is The Best Way To Replace A Grass Trimmer Cord? Replacing a cordless grass trimmer cord can be a […]
Read More
August 1, 2021

Which Tree Gives the Most Oxygen? Find Out In This Post!

Trees are one of nature’s real wonders. Besides from their beauty, they perform a whole range of essential functions which […]
Read More
July 28, 2021
1 2 3 47

James

My father, and his father before him, and his father; for the past 3 generations, my family have always been into gardening. The green fingers is a gift passed down to me and I thoroughly enjoy it! I also have worked in the manufacturing department for Bosch and DeWalt so I like to think I know a thing or two about tools and such!
Read All Updates From James

Leave a Reply

Your email address will not be published. Required fields are marked *

Home Garden HQ

Homegardenhq.co.uk is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk & Amazon.com.

Contact Us

+44 808 178 7230
info@HomeGardenHQ.co.uk
© 2021 Copyright. All Rights Reserved. Created and designed by Home Garden HQ.