How To Measure Chainsaw Chain?

Written By James
Updated July 26, 2021 by James

How To Measure Chainsaw Chain?

What Is The Correct Way To Measure A Chainsaw Chain Length?

Measuring a chainsaw chain is a simple task that you can accomplish in no time with a few simple tools.

In this article, you will find step-by-step instructions on how to measure the length of the chainsaw chains.

  1. Place the first keeper pin into the notches of the middle of the bar. 
  2. Slide the chain onto the bar until the first link is seated at the first pin.
  3. Put the second keeper pin into the notches of the middle of the bar. 
  4. Slide the chain onto the bar until the second link is seated at the second pin.
  5. Put the third keeper pin into the notches of the middle of the bar. 
  6. Slide the chain onto the bar until the third link is seated at the third pin. 
  7. Put the fourth keeper pin into the notches of the middle of the bar.
  8. Slide the chain onto the bar until the fourth link is seated at the fourth pin.
  9. Install the fifth keeper pin into the notches of the middle of the bar.
  10. Repeat the steps for each new chain.

The length of the chainsaw chain is measured between the cutting teeth, and the length of the chain between the linkage and the engine.

The teeth are adjusted so that the chain is even at the ends, and the blade is parallel to the ground when the chain is assembled.

Can you put a longer bar on a chainsaw?

Many professional chainsaws can also have an extension added to the bar.

It is recommended that you use an extension that is the same length as the original bar, as adding one that is too long can increase the risk of kickback.

Can you shorten a chainsaw chain?

The chain on a chainsaw is a crucial element of the tool, which ensures precise cutting.

Although chainsaws are designed to stand up to the rough conditions faced while working in a garden, it is essential to keep the chain in the best possible condition.

As time passes, the chain may become dull and will need to be replaced.

However, you can cut this process short by shortening the chain before replacing it with a new one.

You can shorten the chain by removing the chain and cutting off the loose end.

The chain will need to be reshaped after this, which can be done by using a pair of pliers.

How do I know what size chainsaw chain is on my Stihl?

Stihl, one of the largest brands of chainsaws in the world, is one of the strongest brands in the power tool industry, and one of the most respected brands in the hand tool industry.

The one thing chainsaws have in common is saw teeth—chainsaws are not mice.

A chain is simply the chain-lovers version of the saw teeth.

Normal Chain size is measured in inches, and there are four different types of power tools of chainsaws to choose from based on how they are measured: 0.325” (80 mm), 0.325” (84 mm), 0.325” (95 mm) and 0. 325” (102 mm).

The chainsaw chain saw size has a direct impact on how well a chainsaw performs.

Every Stihl chainsaw is fitted with a guide bar, which is responsible for holding the compatible chains in place.

To find out the size of the guide bar, locate the model and serial number and check on the Stihl website or contact their support team.

Chain sharper

Chain sharpeners are important tools for keeping garden chains in good condition.

You can choose from manual or electric sharpeners.

The main type of chain sharpeners are:

  1. The V shaped
  2. The half moon 
  3. The tapered triangle

Self-sharpening chain features

Chainsaws are one of the most popular tools in the world, so they deserve professional protection and expertise.

The traditional way of sharpening chains, however, is to use a razor blade, which is an extremely dangerous method.

This is why the chain sharpening tool chain is a great tool for anybody who want to keep their chains sharp in the safest way.

Self-sharpening chainsaw chain segment features is the ability to cut through a variety of objects while simultaneously sharpening its own teeth.

How to measure the chain length from a chainsaw bar?

Chainsaws are one of the most powerful tools in your shed, and one of the most dangerous.

These things are deceptively dangerous and it's easy to make a snap judgement on how much chain to get when you buy a new one.

But, if you're looking for the safest way to measure chain length, you need to do a few safety checks first.

Step 1: Put the bar in a vise.

Step 2: Connect the chainsaw chain with a tape measure.

Step 3: Measure the length of the chainsaw chain from the center of the chainsaw bar measurement to one of the ends.

Step 4: Write down the correct pitch measurements of chainsaw chains.

Step 5: Compare the common measurements with the correct size chain of the chainsaw in the instruction manual.

Chain true length measurement is the distance between links makes two sawteeth and is measurement category is in inches.

The chain length is usually stamped into the bar of the host of chainsaw chain.

If the number is not available, use a ruler to determine the length.

Chainsaw guide bar

This saws with guide bar is designed to attach to the front of a chainsaw and guide the saw bar as it cuts through wood.

The chainsaw guide bar has a guide on one side to help with sawing clear of the body of the saw and a tab on the other side for easier adjustment of the saw bar.

How do I know what chain to get for my chainsaw?

A chainsaw is a powerful tool that can be used for many different purposes.

So, how do you know which chainsaw to get?

You need to consider: the types of chains of chainsaw you intend to use (fixed-chain or portable with an electric motor), the types of cutting you will be doing, the maximum amount of rotational force the saw is expected to exert, and the size and weight of the saw.

There are also many factors to consider when choosing a chainsaw chain.

The size of the bar, the common chain gauge, the diameter of the chain, the types of chain (stihl vs echo vs husqvarna) and the power of the chainsaw will determine what chain you will need. 

Alternatively, if you are using the chainsaw for pruning trees, then a thinner chain will suffice.

Chainsaw chain types

There are different types of chainsaw chain chains available based on their size of chain, material, number of drive links, chain pitch and the number of cutting teeth.

  1. Size - Choose the right size of chainsaw chain to cut your wood.
  2. Material - Select a chainsaw chain types made of metal or a high quality alloy of steel.
  3. Drive links - Select the number of drive links the chain should have.
  4. Pitch - Select the common pitch size of the chain.
  5. Teeth - Select the number of teeth the chain should have.

Low-Vibration Chains

A low vibration chain is a type of drive chain used to power machinery or vehicles that require a low amount of vibration.

The most common type of low vibration chain is the V-Belt Chain.

The idea of low-vibration chains isn't new, but after a few years of listening to the noise they make when they move a swing, most people have given up on them.

As most gardeners will know, full-skip chains can cause quite a lot of wear and tear over time, so it's important to find a solution.

Chainsaw chain aggressiveness

The aggressive chains of a chainsaw is determined by the quantity of teeth and the length of pitch of the chain.

It is best to use a chain that is recommended by the chain manufacturer of your chainsaw.

The levels of chain aggressiveness are:

  • Least Aggressive: These levels of chainsaw chain have the narrowest, smoothest and sharpest edges. They are perfect for people with sensitive skin.
  • Semi Aggressive: These are more rounded and smoother than the least aggressive type.
  • Aggressive: They have an even more concave edge than the semi aggressive ones.
  • Extra Aggressive: They have the most concave edge of all.

Anti-kickback chainsaw chains

Anti-kickback chainsaw chains are designed for a variety of matching chain of chainsaws and are ideal for those who have a tree or wood between two and four inches in diameter.

It is also designed to prevent kickback, which occurs when the saw meets an obstruction while cutting.

Common chainsaw chain feature variations

Chainsaws are probably the most popular types of power tool accessory.

They are used to do all sorts of jobs in the home, from falling branches, to pruning trees, to sawing through logs, to clearing a path in a forest.

A good chainsaw is a very important essential tool for any homeowner or professional, and can be a lifesaver when it comes to cutting down trees and branches.

A chainsaw chain consists of a number of steel cutting links that have a sharpened cutting surface.

Common chain pitches

Chain pitches can be classified as longitudinal, end-driven, and sideway.

Longitudinal pitches are elongated and straight, and are designed to cope with high verticality and low curvature.

End-driven pitches are used in acute angles and are used to reduce the length of the chain and correct pitch measurement.

Sideway pitches are used to climb on walls and are also used for roof edges.

Durability in carbide chains

Carbide has a wide range of uses that are categorized into three types of use:

  1. Cutting,
  2. Polishing 
  3. Abrasive.

This is because of the durability of the product, among other things.

Carbide chain saws are known to be durable and serve longer than other chainsaws.

It is also a known fact that carbide chainsaws are more effective if you use them at all times in wet weather due to the fact that it is easier to start and run.

Carbide chainsaws have been found to be more durable than other chainsaws over a variety of different factors.

Replacement chain

It is well known that every time you use a chain, the chain and its linkages wear out.

It is also well known that chains are expensive, but you can get a new chain instead of a new chain and its linkages.

You can also get a correct chainsaw chain and its linkages and a new chain, all for the price of one chain.

But if you have to replace all four chains, that is going to cost you more money.

A good quality replacement chain quality can last for years, but it is a good idea to make sure you get a new one at least every 5 years.

Chainsaw chain replacement is necessary due to the fact that the teeth of the chainsaw chain will be worn out after a certain amount of time.

What's the fastest cutting chainsaw chain?

There are few things as satisfying as getting your hands on a new, high-performance garden tool.

They'll make your gardening efforts and the maintenance of your garden easier and more enjoyable.

When it comes to garden tools, there are a few things that you want to make sure you are getting, and one of those things is a good quality chain saw chain.

The fastest cutting chainsaw chain would be a case of a smaller common gauge measurement  and larger number of teeth.

For example, a 3/8-inch by .050-gauge-pitch chain would cut faster than a .325-inch by .050-gauge measurement chain.

There are many size for chainsaw chains available for different purposes.

Each chain has its optimum cutting rate and tension.

If you are looking for a chain of lesser weight, try a lighter chain.

When you're cutting faster, a lighter chain will be more efficient.

When you're cutting slower, a heavier chain will be more efficient.

When you're using a chainsaw for even a short time, you'll need to change the chain, which means you'll need to perform a chain change.

A chain is nothing more than a series of metal links used to connect the sprocket of the motor to the bar of the saw.

Chain maintenance

Maintaining your chainsaw is important to keep it in good working order to avoid the risk of causing an accident and injuring yourself or othe

Before you use your chainsaw again, check the following:

  • Double Check advice as for damage to the bar and chain. Replace the bar and chain if they are bent or damaged.
  • Ensure that the chain is always sharp.
  • Clean the air filter.
  • Clean the spark plug and the carburetor.

Chain maintenance is a process that is often seen as something that needs to be done by specialists, but in fact, there are many simple things that you can do yourself to keep your chainsaw in good working order.

Similar Posts You May Like

7 Steps to Repair a Cut Cable on Your Hedge Trimmer

Discover how to breathe new life into your hedge trimmer by following these 7 straightforward steps to repair a cut cable.
Read More
May 21, 2024

A Practical Guide to Determining Who Is Responsible for Cutting Boundary Hedges

Identify the surprising factors that determine hedge ownership and maintenance responsibilities to avoid costly disputes with your neighbors.
Read More
May 21, 2024
1 2 3 190


My father, and his father before him, and his father; for the past 3 generations, my family have always been into gardening. The green fingers is a gift passed down to me and I thoroughly enjoy it! I also have worked in the manufacturing department for Bosch and DeWalt so I like to think I know a thing or two about tools and such!
Read All Updates From James

Leave a Reply

Your email address will not be published. Required fields are marked *

Home Garden HQ is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to &

Contact Us

+44 808 178 7230
© 2024
 Copyright. All Rights Reserved. Created and designed by Home Garden HQ.